;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make    ;
; custom modifications (manager_custom.conf).                                                          ;
;--------------------------------------------------------------------------------;

;*******************************************************************************
; AUTO-GENERATED AND CUSTOM USER MANAGER INCLUDED HERE                        *
;*******************************************************************************
;
; AMI - Asterisk Manager interface
;
; FreePBX needs this to be enabled. Note that if you enable it on a different IP, you need
; to assure that this can't be reached from un-authorized hosts with the ACL settings (permit/deny).
; Also, remember to configure non-default port or IP-addresses in FreePBX Advanced Setting.
;
; The AMI connection is used both by the portal and the operator's panel in FreePBX.
;
; FreePBX assumes an AMI connection to 0.0.0.0:5038 by default.
;
[general]
enabled = yes
port = 5038
bindaddr = 0.0.0.0
displayconnects=no

[a8e9fc7b6dadf70e61ca49c69040f2ec]
secret = 68206dce315dce448e4cf8e863d0cfac
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate,message
write = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate,message
writetimeout = 5000

#include manager_additional.conf
#include manager_custom.conf

[odoo]
secret = OdooAMI2026!
deny = 0.0.0.0/0.0.0.0
permit = 192.168.10.0/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan
write = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan
writetimeout = 5000